2000L Water Tank Blow Moulding Machine

Product Detail

2000L Water Tank Blow Moulding Machine



Function introduction of blow molding machine

The plasticizing system of the blow molding machine mainly consists of the power system, the cylinder, the screw, the die head, the retreating oil cylinder, the heating system and the cooling system. The main function of the plasticizing system is to heat and mix the raw materials and to form a homogeneous mold at the outlet of the die.

Before the heating is ready for production, the hollow blow molding machine should first open the cooling water passages to the plasticizing system, and observe the influent and backwater situation and the actual effect.




Our advantage:

1. Suntop blow molding machine can reduce the power consumption of production in your factory by 20%-30%.

2. Suntop has a quick aftermarket reaction, which effectively helps you reduce the delay time of the production water tank blow moulding machine.

3. we can help customers to do industry analysis, product optimization, mold design, test production. Finally, let the customers take a full set of mature production lines with confidence.

4. Suntop series hollow blow molding machine is easy to operate and has strong stability.




The basic configuration of hollow blow molding machine:

Model system ----ABB linear guide, turbocharged cylinder and servo motor.

Extrusion system - - High quality 30:1 nitriding screw, high quality gear box, frequency converter.

Die head system -- Accumulator die head blow moulding machine .

Hydraulic system – A series of parts of the YUKEN.

Circuit system -- Imported famous electrical components such as Schneider, OMRON, ABB and so on

PLC control system - Human-machine dialogue interface operation screen, color graphic and text clear and clear, safe and stable and easy to operate

Thick wall control system - MOOG 100 point thickness control system




CATEGORY	ITEM	UNIT	ST-2000L	ST-2000L-?	ST-2000L-?	ST-2000L-?
Basic Specification	Raw material		HDPE etc	HDPE etc	HDPE etc	HDPE etc
	Container capacity max	L	2000	2000	2000	2000
	Dimension	m	8.2*5.8*6.6	8.9*5.8*6.6	8.9*5.8*6.6	10*6.2*6.6
	Total weight	kg	35000	40000	45000	49000
Extrusion system	Diameter of Screw	mm	140	120*2	110*3	100*4
	Screw L/D ratio	L/D	30:1	30:1	30:1	30:1
	Screw rotating speed	R/min	10—85	10—85	10—85	10—85
	Plasticizing capacity	Kg/h	400	520	550	600
	Drive motor	kw	110	75*2	55*3	45*4
	heating power	kw	45	30*2	27*3	25*4
Die Head	Die head material		38CrMOALA	38CrMOALA	38CrMOALA	38CrMOALA
	Accumulator Volume	L	70	70	70	70
	Accumulator capacity	kg	52.5	52.5	52.5	52.5
	heating power	kw	40	42	45	48
Clamping system	Platen size	mm	1800*2100	1800*2100	1800*2100	1800*2100
	Clamping range	mm	1100—3100	1100—3100	1100—3100	1100—3100
	Clamping force	kn	1400	1400	1400	1400
Power consumption	Servo pump power	kw	45	45	45	45
	total power	kw	240	297	336	373
	Average energy consumption	Kw/h	103	128	138	153
	Air consumption	M³/min	1.5	1.5	1.5	1.5
	water consumption	M³/h	3.8	3.8	3.8	3.8




The real picture of the hollow blowing machine